Code 300 32 Sdr Download
Getting started with sdr 1. Getting started with SDR and GNURadio Prashanth Varma 2. About me. Security analyst at Defmax. Full Stack(MERN) & iOS developer. Part time bug bounty participant. Beginner in IOT security. Twitter - @cymtrick. Note: This post is now old (written in 2014). As of mid 2015 the latest version of DSD+ can be downloaded from www.dsdplus.com. Also note that in 2015 DSD+ changed their version numbers for some reason, so 1.5 is actually older than 1.1. Version 1.5 of Digital Speech Decoder Plus (DSD+) has been released. DSD+ is a popular Windows software tool used for decoding digital speech such as P25 with.
From The RadioReference Wiki
There are many kinds of data decoders available ranging from public domain packages to professional dedicated units. Prices vary from free up to very expensive and price is dependent on how much you want to be able to decode and what tools are available for signal analysis and identification. Public domain packages, while good, can not compete with the capability provided by the more expensive decoding software. It is safe to say that price goes up with increased capability in this market - be prepared to spend some big money if you want to cover a lot of modes.
The big push these days is in the field of soundcard-based software, or those that requires a USB dongle to work (The Hoka Code 300-32 is an example). There are many price levels as well as operating systems – from Java-based to Windows, even a few for the IPad. Many are free, but if you get into the USD1000 market and up, you find Wavecom's W-Code, Krypto500, gotoMonitor and GX430 from Rohde-Schwartz.
What kind of tools are available on these kilobuck-level decoders? These include
- Signal Identification (FSK, MFSK, PSK)
- Accurate baud rate measurement
- Correlation Bit Analysis (ACF)
- Variety in modes decoded/identified
- Ability to save captured text (disk and printer)
- Tools for analysis, signal decomposition and demodulation
Signal Identification
You can't beat a good Signal Identification Mode; Wavecom and Hoka products, along with Krypto500 include this option. A good Signal Identification mode simplifies the task of figuring out what mode is currently tuned, but keep in mind that even the best identification mode is not always 100% correct.
A common problem affecting these automated tools is that some keying systems share common idle characteristics; active traffic is needed to correctly identify the exact mode. Also the presence of local interference, various propagation effects, or a noisy signal can make it difficult to correctly or reliably identify.
Somewhat surprisingly, experienced listeners of digital systems will largely be able to outperform these tools, at least in the initial classification of signal type (FSK, MFSK, PSK, ARQ, FEC etc), speed and even some other characteristics of the signal.
Baud Rate Measurement
Accurate measurement of baud rate is another vital capability. Many modes can be accurately identified on baud rate alone because many rates are unique to a keying system. It also provides the opportunity to 'fingerprint' a signal, system or the user. For example, the Hoka decoders can measure baudrate accurately to 3 decimal places in the presence of a quality signal but also do well on marginal signals, eventually settling down on a reasonable measurement. If your signal is full of noise you might not see 3 decimal places but at least on Hoka decoders you will have displayed those decimal places that make sense - a very nice feature.
Autocorrelation Bit and ACF Analysis
Autocorrelation Bit is a technique that samples the incoming digitized bit stream and presents the data as a graph of bit occurrences plotted against time. This will show when patterns occur within a signal, allowing you to determine the number of bits in a character frame (this is commonly referred to as the ACF or Auto Correlation Factor), giving you another piece of information when determining an unidentified system. This kind of analysis tool reveals cycle period and shows when there are NO patterns in a signal indicating an encrypted or psuedo-random bit-masked signal, allowing you to move quickly onto more productive signals. Hoka, Krypto500, go2 and Wavecom decoders include autocorrelation bit modules.
Some of the waterfalls in our HF Modes Currently Active and CIS Modes articles include a Hoka-generated ACF.
Mode Variety
There is nothing more frustrating than being able to receive a clean signal and then not being able to identify or decode it (ignoring the problem of encrypted signals for the moment). The more expensive the decoder, the more likely it will have a large selection of modes.
Bear in mind however, that the huge selection of modes offered by the professional decoders is now merely a relic of times gone by, many systems having been long replaced by faster, more modern systems. On some rare occasions, organizations may test old, now antiquated backup systems but most of these modes have long disappeared into the history books.
Ability to save captured text (disk and printer)
The ability to save decoded output to a file and/or the printer should be considered a very important feature of any decoder. Having some form of hard copy, on disk preferably, allows for archiving for later reference or later analysis and independent printing and editing.
Tools for Analysis
If you are interested in going beyond the Identification and decoding of signals heard on the air you are going to need tools. Tools such as Spectrum Analyzers, Character Analysis and Phase Analysis modules are some of the necessary tools needed to analyze today's modern systems. This is, for obvious reasons, not for everyone.
Analysis on the Cheap
Up to a few years ago, there were dedicated hobby-level hardware-based terminal decoders, but they've largely been abandoned. Most all of the modes covered by these units nowadays are either amateur radio specific (i.e. Kantronics) or support has been discontinued by the manufacturer (the Universal M-7000 and M-8000, for example). Some of these units had the ability to 'guess' at the mode being used; the stronger the signal, the more the chance that the guess was correct. Unfortunately this method hasn't kept up with the development of newer modes. There's a link to a PDF file on the Universal website that lists all the digital terminal units that were sold by Universal (made by DES and Info-Tech), along with some technical specifications, in the HF Appendix.
In some cases, the frequencies used by modes like HFDL and, to a certain extent, ALE, are either well known and/or widely published. This is, of course, but one clue in identifying a user. It’s worth also mentioning that for many organziations using HF, old habits die hard. Operating procedures, frequencies and other aspects of a network remain as equipment is upgraded. This was seen in the 1990s for example, as many networks moved from manually-managed RTTY modes to MIL-STD-188-141A/B-based automated networks. In many cases, station identifiers and channels were preserved.
A few programs (notably fldigi and MultiPSK) use a method called Reed Solomon Identification, or RS ID. Briefly, it attempts to identify a transmission based on a series of tones that equate to an unique identifier. See this page for a more detailed description. This method is pretty limited, simply because not every mode we can find in the non-amateur bands has been assigned an identifier.
Many digital decoding packages have the ability to display an audio representation of the signal being received. This ability comes by many names; sonogram, waterfall display or audio spectrum display, just to name a few. This article (PDF) describes in some detail how to use a sonogram and how to record the signal. Both are important - you may need to play the signal back several times before you get a clear picture of what the signal looks like. The accuracy of the sonogram is going to be greatly influences by many factors; the quality of the signal being received, your receiving setup and the PC you are using will all play a role here.
Now what about identifying the patterns shown in the sonogram?
The links found in the HF Appendix have pictures of sonograms (and in some cases audio samples) of numerous kinds of digital signals. In addition, some of the active modes found on the HF Modes Currently Active article have waterfalls. You can use these as a guide, but remember, it's another clue as to the mode (and by extension, sometimes the potential user) of the signal.
What About the Other Less Expensive Software?
There are some software packages that contain tools that can do at least some of what the more expensive decoders can in terms of analysis. This information comes directly from that package's website;
- Fldigi
- RS ID (as described above), FFT Scan and Waterfall
- MultiMode (for Macs)
- FFT / Spectrum Analyzer and Bit Analysis
- MultiPSK
- DSP Filters and Analysis, RS ID (as described above),Spectrum Display (RTL-SDR only)
- Radiocom6
- Spectrum Analysis, Oscilloscope, Audio Analyzer
- RXPlus
- Audio Display and Waterfall
- Sigmira
- Spectrgraph, Waterfall and Phase Plane
- Sorcerer
- Demodulated Bit Stream to ASCII file, screen or hexadecimal output
- SkySweeper (all versions)
- FFT and Spectrum Analysis
- SkySweeper (Professional)
- Bit, Speed, Phase Analysis and Histogram
- WinRadio's Advanced Digital Suite
- Signal Classifier, Audio Oscilloscope, and Spectrum Analyzer with Waterfall
- WinRadio's Universal FSK decoder
- Spectrum analyzer, character analysis, can estimate baud rates (with some modes) and a bit inversion parser.
In addition, a package called Signal Analyzer has the ability to analyze digital signals with great complexity and variety. At under USD100, it looks like it would be a good option if one doesn't want to be paying for the multi kilobuck packages. There's an introduction article (PDF) on how to set up this software on the UDXF website. It’s sole downside is that it relies on offline analysis and cannot be used on live audio streams.
There are a number of packages that display audio waveforms, and sometimes, manipulate the incoming signal. Programs like Audacity, Baudline and even SR5 (which, despite the description on the website, works just fine on receivers other than the AOR-5000) all can do varying levels of analysis. You're not going to get all the complex functionality such as autocorrelation, but you might find these tools to be useful. It's up to the user to decide how deep into the analysis game s/he wants to go.
These programs, and several others, are linked on the HF Software Decoders article of this document.
Many of these packages do, however, enable a user to measure the frequency placement, spacing and number of tones or channels that make up an unknown signal and determine offsets and center frequencies. These are some of the most important signal parameters used when reporting signals so that others may accurately tune to and decode them in future.
What Software Should I Get?
When you're just starting out, it's tempting to get something that's all in one, like the Hoka, Wavecom or Krypto offerings. Doing that, however, that can lead to frustration when you are presented with a myriad of tools and modes that are both strange and unfamiliar.
A better approach is to be a bit more focused. If you are interested in a particular service, you can tailor your choices more easily. Let's take a quick tour, and, for the purposes of this discussion, the multi-kilobuck packages from Hoka, Wavecom, Krypto and others are not considered.
All of these packages' links can be found on the HF Software Decoders page.
- Aeronautical - The primary digital mode on HF would be HFDL; therefore, your choices include MultiPSK, PC-HFDL and Sigmira
- Amateur Radio - If this is your interest, then consider MultiPSK, PC-ALE and fldigi. It should be noted that some ham related packages that concentrate on a particular mode (like PSK31) can often do a better job than one that covers many modes.
- Marine - Here we have several modes to consider - GMDSS/DSC, NAVTEX, FAX Weather charts and even some PACTOR (although it should be noted that most maritime PACTOR uses compression and encryption schemes that can't be easily read). Choices here include MultiPSK, SeaTTY, PC-NAVTEX, Frisnet, DSC Decoder and the Java-driven JNX.
- Military - With the number of users of ALE growing rapidly, this mode is one that has a number of possible choices, including MultiPSK, PC-ALE, Sorcerer and possibly SkySweeper
- Russian - We get a little deeper into the world where broadcasts are often encrypted - they can be decoded, but understanding what's actually being said is not yet possible. Rivet is often the decoder of choice here, although Sorcerer also lists several CIS modes.
If you are using a Software Defined Radio (SDR), you might also consider whether you can use decoding software that interfaces directly with your radio. This would make your installation simpler, because you would not need to use a separate application like Virtual Audio Cable to feed audio. We have a list of such software, cross referenced by SDR, in the SDRs and Digital Decoding article.
If you really want something that's more encompassing, then consider MultiPSK and Sorcerer, which is free.
Code 300 32 Sdr Download Software
Do I Need More Than One Package?
This is an interesting question. There is a wide variety of soundcards - everything from cheap Chinese knock-offs to Soundblasters and many in between. This wide a variety means that it's nearly impossible to know how a particular package will work with your equipment - so it's a good idea to have more than one in your toolkit.
You might fail to decode something with one package, but succeed with another. This is because each package uses its own algorithms - and how that interacts with your soundcards can only be determined by experimentation, particularly when tuning weak signals, or those bothered by propagation.
Sdr 32 Pipe
- Return to DXing Digital Utilities
- Go to SDRs and Digital Decoding
- Go to HF Hardware Decoders
- Go to HF Software Decoders