.Disclaimer gas stove top ranges can be dangerous, tampering with them may result in fire, injury, or even death! Use this information at your own risk!

•  If the mains connection cable is damaged, it must be replaced with a special connection cable type H 05 VV-F (PVC insulated), available from Miele, by a Miele approved service technician or suitably qualified electrician in order to avoid a hazard.
• Miele 36' Gas Cooktop, Model KM3474GSS. Features: Burner Configuration. 5 completely sealed burners (2) 15,300 BTU Double inset super burners (1) 12,000 BTU Super burner (2) 9,000 BTU High-speed burners; Standard Features. For Natural Gas connection; Center control panel; Stainless steel knob controls; Fast ignition system; Ignition.
• This repair guide provides step-by-step instructions on replacing the spark igniter switch in a gas cooktop. The spark igniter switch is located on the stem of the burner control valve. Replace the spark igniter switch with a manufacturer-approved replacement part if the burners don't spark when you turn the burner control knob to the Lite.

A gas range will always make a clicking noise whenever you turn on the surface burner knob after which the burner will light. The noise comes from an electric igniter that sparks the burner and stops when the burner lights at least after clicking 3 times. If it doesn’t ignite, then there is a problem somewhere that needs to be addressed by a range repairman.

Gas stove igniter won’t spark

The following are common problems why a gas range igniter won’t light and how to repair them.

Some things to check when your gas stove not clicking or lighting:

Electric Stove Burners Not Working – Food Debris And Grease

Most gas burners have a problem lighting because of food debris or grease that blocks normal flow of gas.
Invite your residential gas range expert to your house for inspection of the faulty burner. First, the grate on top of the burner and the burner base will be removed. The burner base will then be soaked in warm water or vinegar and scrubbed with a stiff brush to remove food particles. Surrounding areas will also need to be cleaned with soapy warm water to remove grease.

Food clogged in the burner holes will need to be removed with a needle, paper clip or metal pin. Never use a tooth pick to remove food debris in the small holes as it can break off and get lodged inside the holes. Next, the burner and grill should be replaced for the burner to be lit once more. If it fails to ignite, then your range repairman will inspect the connections and igniter for any other problem.

How To Repair Gas Stove Igniter

If the burner has been well cleaned and other gas stove repair has been done and the igniter still won’t light, then it could the one causing the problem. Your range repairman will ignite the stove with the lights off to test it. An orange or yellow spark as opposed to a clean bluish-white spark means that the igniter needs to be replaced.

To remove the faulty igniter, power and gas are shut off and then the burner base is screwed out. All wires leading from the igniter will also be disconnected to have it removed. Your repairman will use your stove’s model number as a guide in buying a new igniter. The new igniter, burner base, cap and the stove’s grate will then be replaced. Next, power and gas are restored before the new burner is tested.

Stove Not Working – Loose Connections

Though not common, some connections of your gas range or stove may become loose probably due to cleaning or installation. Loose wires that link the igniter to the stoves control module may affect ignition.

You can invite an oven technician to your home to inspect for any loose connections. First, power is switched off. Next grate, burner cap and sealed burner base are removed to inspect for any loose wires. Loose or disconnected wires are then secured in place. Finally, burner base, cap and grate are reinstalled before power is switched on to test the new connection.

A gas range will always be useful for every household and with proper care, you can continue enjoying its advantages. In terms of energy costs, a gas stove can be very saving since it continues cooking even when the power is not on. The stove also provides instant heat which saves your cooking time. Consider hiring a stove service technician to provide maintenance service for your gas range and prolong its life.

The following are things you should be familiar with when solving the problem with your home appliance or gas stove igniter not clicking

• gas burners
• burner knobs
• surface burners
• burner caps
• burner holes
• control module
• ignition burners
• sealed burners
• igniter switch
• burner grates
• ranges burner
• electronic igniter
• top igniter
• oven door
• wire connector
• burner heads
• igniter module
• igniter sparks
• spark ignition
• spark module
• stove burner
• burner igniter
• oven igniter
• gas cooktop
• spark ignition switch
• igniter control module
• range top
• gas stove top
• stove repair

Common causes and problems your are likely to identify with your gas appliance

• gas stove igniter won’t click
• disconnected wire
• gas leak
• wont heat
• wont ignite
• won’t stop clicking
• clicking sound
• igniter wont stop
• continuous clicking
• igniter clicking
• burners wont light
• stop clicking
• oven wont work
• stove top not working
• burner won’t work
• ignites the gas
• wrong oven temperature
• electric range won’t work
• gas ovens won’t work

Possible Solutions

• clean the burner
• replace the igniter
• remove the grate
• remove the burner
• door repair

List of Broward County Locations We Serve:

Gas Stove Repair Pompano Beach Florida, Stove Technician, Dania, Margate, Miramar, Tamarac, Lauderdale Lakes, Parkland, Refrigerator Repair, Gas Appliance Repair, Range Repair, Oven Repair Technician in Oakland Park, Lauderhill, Fort Lauderdale, Appliance Repair Service in Cooper City FL, Plantation, Sunrise FL Microwave Repair, Hallandale, Stove Repair, Deerfield Beach, Davie, Pembroke Pines FL In Home Appliance Repair

Miele Gas Cooktop Igniter Problems Beeping

Miele Stove Top Troubleshooting

A gas range will always make a clicking noise whenever you turn on the surface burner knob after which the burner will light. The noise comes from an electric igniter that sparks the burner and stops when the burner lights at least after clicking 3 times. If it doesn’t ignite, then there is a problem somewhere that needs to be addressed by a range repairman.

Gas stove igniter won’t spark

The following are common problems why a gas range igniter won’t light and how to repair them.

Some things to check when your gas stove not clicking or lighting:

Electric Stove Burners Not Working – Food Debris And Grease

Most gas burners have a problem lighting because of food debris or grease that blocks normal flow of gas.
Invite your residential gas range expert to your house for inspection of the faulty burner. First, the grate on top of the burner and the burner base will be removed. The burner base will then be soaked in warm water or vinegar and scrubbed with a stiff brush to remove food particles. Surrounding areas will also need to be cleaned with soapy warm water to remove grease.

Food clogged in the burner holes will need to be removed with a needle, paper clip or metal pin. Never use a tooth pick to remove food debris in the small holes as it can break off and get lodged inside the holes. Next, the burner and grill should be replaced for the burner to be lit once more. If it fails to ignite, then your range repairman will inspect the connections and igniter for any other problem.

How To Repair Gas Stove Igniter

If the burner has been well cleaned and other gas stove repair has been done and the igniter still won’t light, then it could the one causing the problem. Your range repairman will ignite the stove with the lights off to test it. An orange or yellow spark as opposed to a clean bluish-white spark means that the igniter needs to be replaced.

To remove the faulty igniter, power and gas are shut off and then the burner base is screwed out. All wires leading from the igniter will also be disconnected to have it removed. Your repairman will use your stove’s model number as a guide in buying a new igniter. The new igniter, burner base, cap and the stove’s grate will then be replaced. Next, power and gas are restored before the new burner is tested.

Stove Not Working – Loose Connections

Though not common, some connections of your gas range or stove may become loose probably due to cleaning or installation. Loose wires that link the igniter to the stoves control module may affect ignition.

You can invite an oven technician to your home to inspect for any loose connections. First, power is switched off. Next grate, burner cap and sealed burner base are removed to inspect for any loose wires. Loose or disconnected wires are then secured in place. Finally, burner base, cap and grate are reinstalled before power is switched on to test the new connection.

A gas range will always be useful for every household and with proper care, you can continue enjoying its advantages. In terms of energy costs, a gas stove can be very saving since it continues cooking even when the power is not on. The stove also provides instant heat which saves your cooking time. Consider hiring a stove service technician to provide maintenance service for your gas range and prolong its life.

The following are things you should be familiar with when solving the problem with your home appliance or gas stove igniter not clicking

• gas burners
• burner knobs
• surface burners
• burner caps
• burner holes
• control module
• ignition burners
• sealed burners
• igniter switch
• burner grates
• ranges burner
• electronic igniter
• top igniter
• oven door
• wire connector
• burner heads
• igniter module
• igniter sparks
• spark ignition
• spark module
• stove burner
• burner igniter
• oven igniter
• gas cooktop
• spark ignition switch
• igniter control module
• range top
• gas stove top
• stove repair

Common causes and problems your are likely to identify with your gas appliance

• gas stove igniter won’t click
• disconnected wire
• gas leak
• wont heat
• wont ignite
• won’t stop clicking
• clicking sound
• igniter wont stop
• continuous clicking
• igniter clicking
• burners wont light
• stop clicking
• oven wont work
• stove top not working
• burner won’t work
• ignites the gas
• wrong oven temperature
• electric range won’t work
• gas ovens won’t work

Miele Gas Cooktop Igniter Problems Troubleshooting

Possible Solutions

• clean the burner
• replace the igniter
• remove the grate
• remove the burner
• door repair

List of Broward County Locations We Serve:

Gas Stove Repair Pompano Beach Florida, Stove Technician, Dania, Margate, Miramar, Tamarac, Lauderdale Lakes, Parkland, Refrigerator Repair, Gas Appliance Repair, Range Repair, Oven Repair Technician in Oakland Park, Lauderhill, Fort Lauderdale, Appliance Repair Service in Cooper City FL, Plantation, Sunrise FL Microwave Repair, Hallandale, Stove Repair, Deerfield Beach, Davie, Pembroke Pines FL In Home Appliance Repair